Gas Hot Water System Adelaide – Storage Tanks & Continuous Flow Repairs, Replacement & Installation

When your gas hot water system stops working, you usually feel it straight away. Our team provides fast repairs and reliable replacements right across Adelaide with same-day service for most suburbs. We handle emergency breakdowns, safety concerns and performance issues so you can get your hot water running again without delay.

Hot Water Services
Hot Water Services
Blocked Drains
Blocked Drains
Leaking Taps
Leaking Taps
Gas Fitter
Gas Fitter & Repairs
Pipe Relining
Pipe Relining
Emergency Plumber
Emergency Plumber

Look at all the positive feedback we’ve received from our happy clients here:

Google Review For Wills Plumbing Adelaide
Facebook Review For Wills Plumbing Adelaide

See all of our reviews from happy customers here:

Google Review For Wills Plumbing Adelaide
Facebook Review For Wills Plumbing Adelaide

Why Choose Will’s Plumbing Adelaide for Gas Hot Water Repairs & Replacement?

upfront-pricing-icon
Upfront Pricing
no-hidden-costs-icon
No Hidden Costs
same-day-service-icon
Same Day Service
workmanship-guaranteed-icon
High Quality Work
free-quotes-cons
Free Quotes

Terms and conditions apply.

When to Repair or Replace Your Gas Hot Water System in Adelaide

Gas storage systems typically last 10 to 15 years. Gas continuous flow systems last 15 to 20 years. But not every fault means replacement – and not every old system is worth repairing. Here is how our licensed gas fitters assess the honest answer at your Adelaide property.

System Type & Age Symptom Honest Recommendation Typical Cost
Gas storage, under 8 yrs Pilot light won’t stay lit Repair – thermocouple or gas valve $180-$350
Gas storage, under 8 yrs Leaking from base Replace – tank corrosion cannot be repaired $2,200-$2,900
Gas storage, 8-12 yrs Slow recovery, running out faster Assess – anode rod or burner issue $250-$500 repair
Gas storage, 12+ yrs Any major fault Replace – past economic life $2,200-$2,900
Continuous flow, any age Error code (ignition failure) Repair – usually ignition module or gas valve $300-$650
Continuous flow, any age Fluctuating temperature Repair – flow sensor or heat exchanger scale $350-$700
Continuous flow, 15+ yrs Heat exchanger failure Replace – heat exchanger costs more than new unit $2,400-$3,200
Any gas system Gas smell detected Emergency – turn off gas, call immediately Safety call first
Upgrade Your Gas Hot Water System

How Gas Hot Water Systems Work

If your system is not heating water properly, our gas hot water repair specialists in Adelaide can inspect burners, valves, thermostats, and ignition components to restore normal operation. Gas systems heat water using either a burner or a heat exchanger. Here is the simple breakdown of how they operate:

  • Gas ignites inside the burner or exchanger to create heat
  • Cold water enters the system and is warmed to the set temperature
  • Hot water is delivered to your taps through the main supply line
  • Thermostats control water temperature during operation
  • Safety valves release pressure buildup to protect the unit
  • Some units store hot water in a tank, while others heat it as you use it
gas-storage-hot-water-heater-installation

Continuous Flow vs Storage Gas Hot Water – Which Is Right for Your Adelaide Home?

This is the biggest decision when your gas hot water system needs replacing. Both options work well – but they suit different homes, household sizes, and budgets. Here is the honest comparison from what we see in Adelaide every week.

Factor Gas Storage Tank Gas Continuous Flow
How it works Heats and stores water in a tank (90L to 170L) Heats water on demand as you use it
Hot water supply Limited by tank size – runs out Endless – never runs out
Energy efficiency 3-4 star typical, standby heat losses 5-7 star, no standby losses
Space required Floor standing, needs clearance Wall mounted, compact
Lifespan 10-15 years 15-20 years
Installed cost Adelaide $2,200-$2,900 $2,400-$3,200
Running cost per year Higher (heats water you may not use) Lower (only heats what you use)
Power point needed No (most models) Yes (electronic ignition)
Best for Larger families, multiple taps at once, older Adelaide homes with existing tank setup Smaller to medium homes, apartments, renovations, replacing old tank

Not sure which is right? Call 0484 600 095 and describe your household – how many people, how many bathrooms, and how you use hot water. We recommend the honest option based on your actual usage, not the most expensive one.

Plumber checking a Rinnai HotFlo Water Heater

Need Help With Your Electric Hot Water System?

 

Tell us what your electric hot water system is doing and, if available, include the manufacturer, model number and a photo of the unit. This helps the team understand the enquiry before getting back to you.

 

Hot water unit
Name
Name
First
Last

Maximum file size: 5MB

Gas Hot Water Brands We Repair, Replace and Install in Adelaide

Rheem units are well known for their strength and reliability, especially for larger homes that use a lot of hot water.

Rinnai systems are popular for continuous flow installations because they heat quickly and run with impressive consistency.

Bosch offers efficient continuous flow units that suit smaller households and properties wanting reliable hot water with lower running costs.

Dux and Vulcan storage tanks are common in older Adelaide homes, and we can repair or replace both depending on their age and condition.

Chromagen and Aquamax provide a solid balance of efficiency and performance for families wanting dependable hot water at a good price point.

No matter the brand, we can service, repair or replace the system and ensure it suits your home and daily use.

Bosch Hydropower Hot Water Heater

Common Gas Hot Water Problems We Fix Across Adelaide

Gas hot water systems fail in specific, diagnosable ways. Here are the faults we repair every week in Adelaide homes – with the causes and what we do about them.

  • Pilot Light Keeps Going Out – Wind, thermocouple failure, or gas supply issue. We test the thermocouple, flame sensor, and gas pressure. Most pilot issues are same-day repairs from $180 to $350.
  • No Hot Water At All – Burner failure, broken thermostat, or gas supply interruption. For storage systems, the burner assembly or thermostat is usually the fault. For continuous flow, check for an error code on the display – we decode Rinnai, Bosch, and Rheem codes on-site.
  • Rinnai Error Code 11 or 12 (Ignition / Flame Failure) – The two most common Rinnai Infinity error codes in Adelaide. Code 11 means ignition failed. Code 12 means flame established but lost. Causes include a dirty flame rod, gas valve issue, or exhaust blockage. Same-day fix from $300 to $650.
  • Bosch Continuous Flow Not Firing – Bosch Hydropower units rely on water flow to ignite. Low water pressure, blocked inlet filter, or worn hydro generator. Bosch electronic units check for E1 (ignition), E3 (fan), E9 (gas issue). We carry Bosch parts on the truck.
  • Water Temperature Fluctuating – Common in continuous flow systems. Causes include flow sensor fault, scaled heat exchanger (Adelaide hard water), or undersized unit for your household demand. We test flow rate and temperature delta on site.
  • Gas Smell Near Hot Water System – Turn off the gas at the meter immediately and call us. Gas leaks around hot water systems are usually at the gas connection, flex hose, or internal valve. Our licensed gas fitters locate and repair the leak, then issue a Certificate of Compliance.
  • Leaking Gas Storage Tank – Rust at the base of a gas storage tank means the inner lining has failed. This cannot be repaired – the tank must be replaced. We carry common replacement sizes and can install same-day in most cases.
  • Hot Water Running Out Faster Than Usual – Sediment buildup in the tank base (common after 5+ years in Adelaide’s hard water), a failing burner reducing recovery rate, or a broken dip tube mixing cold water with hot at the outlet. We diagnose the exact cause before quoting.
Plumber in Adelaide inspecting hot water system pipes to identify and resolve issues.

Need Your Gas Hot Water System Fixed Today!

If your gas hot water system has failed or is showing signs of a problem, contact us, and we will organise fast help. We service all Adelaide suburbs and can attend most jobs on the same day.

What Happens When You Call About Gas Hot Water

Phone Diagnostic (2- 5 minutes)

Tell us your system type (storage or continuous flow), brand, and what is happening. If you have an error code, read it to us – we can often tell you on the phone whether it is a same-day fix or a parts-order situation. If your pilot light is out, we may be able to walk you through relighting it without a callout.

Same-Day Booking With a Licensed Gas Fitter

If it needs a visit, we book a licensed gas fitter (not a general plumber) for the same day if you are without hot water, or the earliest suitable time if not urgent. You get a two-hour arrival window with SMS confirmation.

On-Site Diagnosis Before Any Quote

We test the actual fault – thermocouple, gas valve, ignition module, heat exchanger, flow sensor – rather than guess. Then we give you the honest options: repair with expected life ahead, or replace with a written quote covering system, installation, gas line changes, and Certificate of Compliance.

Repair Today or Replace Same-Day

Common gas parts on every truck (thermocouples, gas valves, ignition modules, flow sensors). Replacement storage tanks and continuous flow units available for same-day installation. Every gas job includes a Certificate of Compliance as required by South Australian law.

Professional plumber from Will's Plumbing Adelaide standing in front of service vehicle

Gas Hot Water Questions Adelaide Homeowners Ask Us

Gas storage tanks (90L-170L) run $2,200 to $2,900 installed. Gas continuous flow systems (16L-26L) run $2,400 to $3,200 installed. Both include removal of the old system, all connections, and a Certificate of Compliance. Exact quote is free after on-site assessment.

Gas storage suits larger families who use hot water from multiple taps at once and homes with existing tank setups. Continuous flow suits smaller to medium households who want endless hot water, lower running costs, and a compact wall-mounted unit. We assess your actual usage and recommend the honest option.

Ignition failure – the system tried to fire, but the flame did not establish. Causes include gas supply issue, a dirty flame rod, or a worn ignition module. Usually a same-day fix from $300 to $650 depending on the cause. Other common Rinnai codes: 10 (ignition), 12 (flame failure), 16 (over-temperature), 25 (drain blockage), 99 (fan or exhaust).

Yes. In South Australia, all gas hot water installation, repair and replacement must be done by a licensed gas fitter compliant with AS/NZS 5601. Every gas job we complete includes a Certificate of Compliance. Unlicensed gas work voids insurance, warranty, and is illegal.

Most commonly, a failing thermocouple – the safety sensor that detects whether the pilot flame is lit. When it fails, it shuts off the gas supply to the pilot as a safety measure. Other causes include wind exposure (outdoor units), blocked pilot orifice, or gas pressure issues. Same-day repair from $180 to $350.

Gas storage systems typically last 10 to 15 years. Gas continuous flow systems last 15 to 20 years. Adelaide’s hard water (especially northern suburbs) can shorten storage tank life by 2 to 3 years if the anode rod is never replaced. Annual servicing extends lifespan significantly.

Yes. We regularly upgrade old gas storage systems to modern continuous flow in Adelaide homes. We check your existing gas line capacity (continuous flow needs higher gas flow), water pressure, and flue requirements. Most conversions are completed in one day.

For a gas storage tank, usually no – the system is at or past economic life, and a second major fault will follow. For a 12-year-old continuous flow system, usually yes – they have 3 to 8 years of life ahead, and most faults are in replaceable components. We quote both options so you can make an informed call.

1-2 people: 90L storage or 16L/min continuous flow. 3-4 people: 135L storage or 20L/min continuous flow. 5+ people: 170L storage or 26L/min continuous flow. These are guidelines – actual sizing depends on how many bathrooms you have and your peak-demand usage patterns.

Yes. Adelaide Hills suburbs (Stirling, Aldgate, Mount Barker, Blackwood) are serviced same-day where possible. Hills homes often have older gas storage systems and occasionally use LPG rather than natural gas. We handle both natural gas and LPG systems.

See what people are saying about our Plumbing Services:

Google Reviews Logo
Facebook Reviews