Pipe Relining Services

PIPE RELINING

Repairing sewer pipes located underground is something that most home owners have to deal with at once stage or another. Over time, pipes break, crack or corrode. At Will’s Plumbing we use systems and devices aimed at extending the service life of sewers and other underground piping infrastructure to ensure that there is no damage to your property.

Choosing to reline your pipes, instead of replacing them, will save you time, and money – both on the materials and excavation/re-installation. And if the damaged pipes are beneath a driveway or walkway, it’s going to cost more to remove the concrete. At Will’s Plumbing we use non-intrusive methods so that everything stays intact.

Along with our Hydrojet drain cleaner we have CCTV (video) drain inspection technology. This can be used to pinpoint any obstacles and drainage issues you may have in your drain. We provide footage of what we have found and recommend the best method of repair.

Gone are the days when relining your pipes is messy, costly and time-consuming. Will’s system is simple and fast, with minimal intrusion – so you don’t need to worry about damage to your house. Sewer repairs that require no digging are cost-effective, and once they’ve been relined, you can eliminate any concerns about having to worry about sewer line damage anytime soon. Give Will’s a call today to have your pipes relined and fixed, with a certainty that there will be no damage to your property.

Drain Pipe Relining is a no-dig repair solution. It is a common technique to repair drains that are in poor condition. It is a good alternative to digging out a section of piping below ground and replacing or repairing it.

It can save you a significant amount of money, rather than paying to replace a section of piping in a difficult-to-access location.

Drains in poor condition can cause blockages which can be inconvenient at the best of times! This repair technique leaves the existing piepe below ground and in-palce; inserting a liner into the section of damaged piping to create a repair within the old pipe.

Relining is cost-effective and less destructive to your propertyy – especially when pipes are located below a house, driveway, concrete foothpath, your bathroom, or any difficut-to-access location.

The method uses a resin, which is applied to a felt/tube material which is then inserted into the damaged section of the drain. This then hardens and cures, using specialised equipment, forming a pipe within the existing pipe section.

Not only less invasive and destructive, drain pipe relining can be a convenient and cost-effective technique. This is ideal for getting the drain up and running as soon as possible.

Drain Pipe relining can be less labour intensive, saving time on-site and money in pocket. It can often leave your property untouched. Your property is left the way it was before we arrived, all with repaired drains. There is often no digging, cutting concrete, removing plants and pavers, removing fences, removing retaining walls or any other inconvenient intrusions. It can also help in preventing future damages!

1. Located the section of piping causing drain malfunction by talking to the customer.
2. Perform a CCTV drain inspection to identify the location of the piping.
3. Discuss with owner options on repair.
4. Clean the section of pipe using drain cleaning equipment and a high-pressure Hydro-Jet.
5. Roughen or mechanically etch the internal surface of the existing piping using sanding discs of a wire brush.
6. Flush to remove any debris.
7. Perform a secondary CCTV drain inspection to inspect the section be relined.
8. Insert the section of liner/felt into the section of piping to be patched.
9. Perform a third CCTV drain inspection to ensure that the liner/felt is located in the correct position and also installed correctly.
10. Reinstate the laterals by opening to the full internal diameter of the lateral, alternatively install one piece lateral junction liner.
11. Perform a fourth CCTV drain inspection to confirm the integrity of the renovated pipe and also a satisfactory outcome of the condition of all laterals.
12. Perform hydristatic testing of the section of piping renovated/relined.